\documentclass[14pt,a4paper,article,oldfontcommands,draft]{memoir}
\usepackage{ISIS}

\usepackage{tipa}
\usepackage{linguex}
\usepackage{colortbl}
\usepackage{qtree}
\usepackage{natbib}

\title{Interdisciplinary Studies on Information Structure:\\
Style Guideline (\LaTeX{}) Version 2\thanks{Version 1.0 was developed by Ralf Vogel. Here comes the Acknowledgement.
  Many thanks to AA, BB, CC, DD, EE, FF, and GG for their valuable comments
  and discussion {\dots} and so on.}}
\author{Mira Grubic}
\institution{Universit\"at Potsdam}

\ISISyear{2000}
\ISISno{00}
\ISIStitle{Petrova, S. and M. Grubic (eds.):}


\markboth{Author's name}{(Short) paper title}



\begin{document}
\maketitle

\begin{abstract}
  Here comes the abstract (about 100 words or less) of the paper. (For your reference, the abstract given here contains exactly 100 words.) This document explains the stylistic specifications for manuscripts submitted to \textit{Interdisciplinary Studies on Information Structure: Working Papers of SFB 632 (ISIS)}. Please read it through and follow the guideline. This document is created using all the preset styles required for the volumes. Please use this document as a template. Make a copy of this file, delete the content, and start writing your work using the preset styles. Or paste what you have written elsewhere and change the styles.
\end{abstract}
\keywords{AAA, BBB, CCC, DDD, EEE}




\chapter{Introduction}

This document describes the \LaTeX\ style requirements for the manuscripts
submitted to \textit{Interdisciplinary Studies on Information Structure: 
 Working Papers of the SFB 632} (ISIS). All manuscripts must
be submitted as a MicrosoftWord file (.doc) or as a \LaTeX\ file (.tex).
Please use the Word/\ \LaTeX\ template file to comply all the requirements.
The template file contains all the preset styles necessary for the
manuscript, and all the settings are correctly set. If one cannot submit a
manuscript with either of these formats, please contact to the volume
editor(s).

The \LaTeX\ style file that defines all necessary formatting settings is\linebreak
\texttt{ISIS.sty}. The style is based on the \texttt{memoir} class which you can get from \linebreak \texttt{http://www.ctan.org/}. 

\chapter{Document Setup}

The preamble of your \texttt{.tex} file must begin as follows:

\small
\begin{verbatim}
\documentclass[14pt,a4paper,article,oldfontcommands]{memoir}
\usepackage{ISIS}
\end{verbatim}
\normalsize

This ensures all the necessary settings (A4 page size, Times New Roman font, 14pt, 1.5 line-spacing, etc.), and must not be changed\footnote{The option \texttt{oldfontcommands} must be included if you use packages that use the old font commands \texttt{$\backslash$rm, $\backslash$sf}, etc., like \texttt{linguex.sty}.}.

\chapter{Title, Headers, and Footer}

Next, please include the title of the paper, the acknowledgments, and the author's name and affiliation.

\small
\begin{verbatim}
\title{- text - \thanks{- text -}}
\author{- text -}
\institution{- text -}
\end{verbatim}
\normalsize

You can optionally include a footer on the first page. If you do, please update the year, number, and title of the ISIS publication.

\small
\begin{verbatim}
\ISISyear{0000}
\ISISno{00}
\ISIStitle{ - text - }
\end{verbatim}
\normalsize

Next, include your name and a short title to provide the headers.

\small
\begin{verbatim}
\markboth{Author's name}{(Short) paper title}
\end{verbatim}
\normalsize

Include  \verb|\maketitle| after   \verb|\begin{document}| to make the title page.

\small
\begin{verbatim}
\begin{document}\maketitle
\end{verbatim}
\normalsize

\chapter{Abstract and Keywords}

The abstract is included using the  \verb|\abstract{}| environment and should contain about 100 words or less. Keywords may be provided using the command  \verb|\keywords{}|.

\small
\begin{verbatim}
\begin{abstract}
  - text -
\end{abstract}
\keywords{ - text - }
\end{verbatim}
\normalsize  

\chapter{Chapter Headings}

Most commands can be used as usual, but note one difference between 
the \texttt{memoir} class and the \texttt{article} class: In \texttt{memoir} the highest
sectioning level is \texttt{chapter}, even with the \texttt{article} 
option. The three sectioning levels you should maximally use are then
\texttt{$\backslash$chapter}, \texttt{$\backslash$section}, and 
\texttt{$\backslash$subsection}:

\begin{tabular}[t]{ll} \toprule
command & level\\\midrule
$\backslash$chapter: & 1 \\
$\backslash$section: & 1.1 \\
$\backslash$subsection: & 1.1.1 \\\bottomrule
\end{tabular}\bigskip

You can use \texttt{$\backslash$subsubsection} and
\texttt{$\backslash$paragraph}, but they will not 
be numbered. Their effect is equivalent to \texttt{$\backslash$section*}. 

Please use \textit{title capitalization} (Capitalize All but Function Words) for chapter headings, and \textit{sentence capitalization} (Capitalize only the first word, as well as the one following a colon) for the lower heading levels (section and subsection).

\chapter{Examples}

Example sentences may be typeset with any package that is on the market, but
please include them when you submit a paper. The following is typeset with
Wolfgang Sternefeld's \texttt{linguex}, using \texttt{cgloss4e}, which is part of
\texttt{gb4e} by Hans-Peter Kolb and Craig Thiersch. You can get both at \texttt{www.ctan.org}.

\exg. Taro-ga   Hanako-ni   ringo-o    age-ta\\
 Taro-\textsc{nom} Hanako-\textsc{dat}  apple-\textsc{acc} give-\textsc{pst}\\
 `Taro gave an apple to Hanako.'

\ex.  
\ag.  Taro-ga   Hanako-ni   ringo-o    age-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  apple-\textsc{acc} 
      give-\textsc{pst}\\
      `Taro gave an apple to Hanako.'
\bg.  *Taro-ga   Hanako-ni   ringo-o    tabe-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  ringo-\textsc{acc} 
      eat-\textsc{pst}\\
      `Taro ate an apple to Hanako.'

This is the code:

{\small
\begin{verbatim}
\exg. Taro-ga   Hanako-ni   ringo-o    age-ta\\
       Taro-\textsc{nom} Hanako-\textsc{dat} apple-\textsc{acc} 
       give-\textsc{pst}  \\ 
       `Taro gave an apple to Hanako.'

\ex.  
\ag.  Taro-ga   Hanako-ni   ringo-o    age-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  apple-\textsc{acc} 
      give-\textsc{pst}\\
      `Taro gave an apple to Hanako.'
\bg.  *Taro-ga   Hanako-ni   ringo-o    tabe-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  ringo-\textsc{acc} 
      eat-\textsc{pst}\\
      `Taro ate an apple to Hanako.'
\end{verbatim}
}\normalsize

Use small capitals for gloss abbreviations (-\textsc{nom}, -\textsc{acc}, -\textsc{pst}, etc.), using the command \verb|\textsc{}|. Please take care to use an example environment in which the judgment status  (*, ?, ??, etc.) is set off from the example by a space, like in the example above. Examples in footnotes will automatically have the right format\footnote{See these examples: 
\exg.  Taro-ga   Hanako-ni   ringo-o    age-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  apple-\textsc{acc} 
      give-\textsc{pst}\\
      `Taro gave an apple to Hanako.'

\exg.  *Taro-ga   Hanako-ni   ringo-o    tabe-ta\\
      Taro-\textsc{nom} Hanako-\textsc{dat}  ringo-\textsc{acc} 
      eat-\textsc{pst}\\
      `Taro ate an apple to Hanako.'

In these examples, the numbering and font size are automatically changed.
}.

The following example uses \texttt{TIPA}, a package by Fukui Rei for processing IPA (International Phonetic Alphabet) symbols in \LaTeX, which is also available at \texttt{www.ctan.org}. If you use \texttt{TIPA}, please take care to load the \texttt{TIPA} package before you load the \texttt{linguex} package.

\exg.  sq\'{\textschwa}\textvbaraccent{c} ek\super{w}uxe\textglotstop{}  e=B\'ob\\
chickenhawk \textsc{=evid=dem} \textsc{det}=Bob\\
`Bob is a policeman.'

Note that the definition of the example counter \texttt{ExNo} in
\texttt{linguex} is such that it is set to zero with each new chapter. This has
the effect that in using the memoir class the examples in each section start
with 1, and referring back to example 1 becomes ambiguous. Therefore, you have
to redefine the counter in \texttt{linguex.sty}:

\small
\begin{verbatim}
%%%%%%%%%%%%%%% COUNTERS FOR LABELLING %%%%%%%%%%%%%%%%%%%%%%%%
% commented out to not let memoir set ExNo to zero with 
% each chapter
%
%\@ifundefined{chapter}{\newcounter{ExNo}}%
%{\newcounter{ExNo}[chapter]}
%%%%% HERE COMES THE CHANGE!!! 
% replaced by simply:
\newcounter{ExNo}

\end{verbatim}
\normalsize 

\chapter{Trees}  

The same conditions apply. Use one of the packages on the market and submit it
with your paper. The following tree is drawn with \texttt{qtree} by Jeff Siskind, available from  \texttt{www.ctan.org}.

\small
\ex. \Tree [.S This [.VP [.V is ] \qroof{a simple tree}.NP ] ]


\normalsize
This is the code:

\small
\begin{verbatim}
\ex. \Tree [.S This [.VP [.V is ] \qroof{a simple tree}.NP ] ]
\end{verbatim}
\normalsize

\chapter{Tableaux}

\newfont{\optifont}{pzdr.afm at 17pt}
\newcommand{\finger}{\raisebox{-1pt}{\optifont +}}
\newcommand{\gray}[1]{\multicolumn{1}{|>{\columncolor[gray]{.8}}c}{#1}}
\ex. Tableaux Example:\\
\begin{tabular}[t]{c@{\,}c@{~}c|c|c|c}\toprule
        &  &/root/       & Constraint 1 & Constraint 2 & Constraint 3 \\
\midrule
\finger &a.& Candidate 1 &              &              &  $*$         \\
        &b.& Candidate 2 &              &     $*$!     &  \gray{}     \\
        &c.& Candidate 3 &     $*$!     &  \gray{}     &  \gray{$*$}  \\
\bottomrule
\end{tabular} 

\newpage

We do not require any specific format for the tableaux. In the 
example above, the following code is used:

\small
\begin{verbatim}
\newfont{\optifont}{pzdr.afm at 17pt}
\newcommand{\finger}{\raisebox{-1pt}{\optifont +}}
\newcommand{\gray}[1]{\multicolumn{1}%
{|>{\columncolor[gray]{.8}}c|}{#1}}
\ex. Tableaux Example:\\
\begin{tabular}[t]{c@{\,}c@{~}c|c|c|c}\toprule
        &  &/root/ & Constraint 1& Constraint 2& Constraint 3\\
\midrule
\finger &a.& Candidate 1 &       &             &  $*$        \\
        &b.& Candidate 2 &       &     $*$!    & \gray{}     \\
        &c.& Candidate 3 & $*$!  &  \gray{}    & \gray{$*$}  \\
\bottomrule
\end{tabular}  
\end{verbatim} 
\normalsize  

Note the definition of the pointing finger: the finger symbol from the\linebreak
\texttt{dingbats} font is used here. This font is standard in all \LaTeX\
packages, so there is a high chance that it will be recognised, when your file
is processed. The grey shading of tableau cells is done with the package
\texttt{colortbl}. Include it by stating
``\texttt{$\backslash$usepackage\{colortbl\}}'' in the preamble. The macro
``\texttt{$\backslash$gray}'' grey shades the cell it is called within. It has
one obligatory argument, the content of the cell. In case of empty grey shaded
cells, use ``\texttt{$\backslash$gray\{\}}''

\chapter{Graphics, Tables, etc.}

Manuscripts will be reduced to A5 size when they are printed. Make sure that the inserted graphics and tables are large 
enough so that they are easily readable after the manuscript is reduced to A5 paper size.

\chapter{Miscellaneous}

Use `en-dashes' (--) between numbers such as page numbers in the reference
(e.g.,  p. 100--102), example numbers (e.g., (10)--(12)), instead of normal 
hyphens. Use `em-dashes' (---) to set off the text, either without spaces---like this---or with spaces --- like this --- but please do so consistently. You can use either single or double space after period, but please do so consistently. Follow traditional publishers' guidelines for punctuation and other stylistic conventions, e.g., quotations.

\chapter{Appendix, References, and Contact Information}
After the main text, appendices may be added. They will be followed by the list of references and the contact information of the author(s). Reference and appendix headings are not numbered, please use \verb|\chapter*{Appendix}|

We leave the style of reference up to authors, but usage of BibTeX is very welcome. The title of the reference should be ``Reference'', if using BibTeX this can be changed using \verb|\renewcommand\bibname{Reference}|:

\small
\begin{verbatim}
\renewcommand\bibname{Reference}
\bibliographystyle{apalike}
\bibliography{example}
\end{verbatim}
\normalsize

At the end of the paper (i.e., after references), write down author's contact information 
(Name, postal address, e-mail address, website URL). Use the predefined \texttt{contact}
environment with doublebackslashes as line separators:
\newpage
\small
\begin{verbatim}
\begin{contact}
Mira Grubic\\
Universit\"{a}t Potsdam\\
SFB 632 ``Informationsstruktur''\\
Karl-Liebknecht-Strasse 24/25\\
14476 Golm\\
Germany\\
grubic@uni-potsdam.de\\
\end{contact}
\end{verbatim} 
\normalsize 

Here is an example for the reference and contact information:

\nocite{jackendoff1972}
\nocite{rooth1985}
\nocite{selkirk1995}

\renewcommand\bibname{Reference}
\bibliographystyle{apalike}
\bibliography{example}

\begin{contact}
Mira Grubic\\
Universit\"{a}t Potsdam\\
SFB 632 ``Informationsstruktur''\\
Karl-Liebknecht-Strasse 24/25\\
14476 Golm\\
Germany\\
grubic@uni-potsdam.de\\
\end{contact} 

\end{document}
